Kemper 555C Welding Kit without Cartridges

This Kemper gas set is better quality than the OxyTurbo set which looks to be similar. It is not just the overall build quality but it is the attention to the torch gas control valves which make this set so much better and easier to work with, being able to control the flame size accurately and consistently. This Kemper Group oxy / LPG fuel brazing and small heating set makes use of the smaller disposable oxygen canister with the M10 right hand, these canisters are more regularly available when compared to the OxyTurbo set which uses special threads.

The 555C gas canister outlet valve is fitted with a purpose made non return valve to prevent oxygen backfeeding, likewise the simple pressure adjusting oxygen regulator outlet is also fitted with a non return vavle to prevent fuel gas back feeding into the oxygen canister. The construction of the outlet non return valves includes a dirt filter.

- Nozzle tube diameter = 1.00 x 15mm long tube

- Length from connection nut to - nozzle tip = 38mm

- OAL nozzle length disconnected = 27mm

- Shank handle dia. = 28mm

- Shank handle tube length = 120mm (hose inlet to valve block)

- Shank overall length to nozzle connection = 160mm

- Shank control valve diameter = 15.2mm

- Shank with standard neck fitted = 255mm

- Neck tube dia. = 6.05mm

- Neck tube length = 105mm

- Standard nozzle dia across hex = 9 mm

- Standard nozzle tip dia. = 5.2mm